LifeSafety FPO150 ProWire (Mercury)
LifeSafety Power
Default. Factory-wired Mercury-ready system: FPO150 150W (12A@12V/6A@24V) + B100 dual-voltage module + C8 lock board (8 fail-safe/secure FAI outputs) + D8P aux (8 × 2.5A Class 2), E4M enclosure with Mercury backplate.
Also known as: FPO150, FPO150-B100C8D8PE4M, FP0150, FP0150-B100C8D8PE4M, C8, D8P, B100, ProWire, MCLASS, E4M
WireADoor · Pinout reference
Terminals
SchematicFunctional terminals only
Functional terminals only. The real FPO150 full D8P distribution (8 × 2.5A Class 2 aux outputs, B100 dual-voltage module, C8 lock board outputs) is datasheet-gated and NOT fully represented — do not claim terminal-exact matching. Schematic — exact terminal block pending datasheet.
| Terminal | Label | Kind |
|---|---|---|
| DCp | D8P+ | power-out |
| DCn | D8P− | power-out |
| AUX | AUX | power-out |
| FAI | FAI | fai |
Manuals & cut sheets
Cached offline after the first open.
Used in
Before you wire this
Code and jurisdiction vary. Locking and egress requirements differ by edition and authority — NFPA 101, IBC, and your local amendments do not always agree. This reference confirms only that your wiring matches a known-good electrical topology. It does NOT confirm that the locking arrangement is permitted at this opening. Whether a lock may be installed here — and how it must release on fire alarm, loss of power, and egress — is determined by the Authority Having Jurisdiction and the stamped, approved fire and life-safety design for the building.
If you are unsure how this door must behave in an alarm or power-loss condition, stop and confirm with your foreman or the AHJ before energizing.